Henry Spring washer(Waveform | dish | saddle | Stainless Steel | elastic | spring washers | washers)

Zhen Jiang Henry spring is the largest spring manufacturers to maintain its leading position in the domestic spring industry, the initial production of watches and clocks spring, famous for the quality and stability, both in the spring production technology and equipment are the highest domestic.

Spring ZhenJiang Henry's Henry(Standing standard)Spring washerDisc spring washers、Waveform spring washer、Finger-like spring washerandCurve-shaped spring washer。

HenrySpring washer standardsParameters and specification sheet PDF Download

Henry Spring washer The Zhenjiang Henry spring design and manufacture of the new Spring washer, can be used in the Belleville washer or disc spring does not provide sufficient amount of deformation, or wavy Spring washer can not provide sufficient load occasions. By changing the form of a combination of disc number or disc, you can get a different carrying capacity and characteristic curves。

Henry Spring washerSpecification sheet and standard parameters PDF Download

Load and deformation

Row Out four HenrySpring washer's load - deformation curve。According to these curves，Can estimate the deformation of the washer bearing 50% load。Within the cone height of the nominal value of h is equal to the thickness t of the height H of the washer free minus the washer。

Figure 1 (see above)，H / t = 3.5 corresponds to curve，50% deformation when the load is about to flatten the load by 85%。

Figure 1 (see above)，The typical curve of 75% deformation。HenrySpring washer some sagging and excessive stress concentration in more than 75% deformation，Deformation should be avoided in more than 75% of applications。

Stacked HenrySpring washer

Together or superimposed stacked washer，Enjoy greater load or deformation。

HenrySpring washer-Specification

HenrySpring washer-Specification >>Carbon steel

Material： 碳钢 SAE 1070至 SAE 1074
Outer diameter：From 0.250 in. (6.35 mm) to 1.07 inches (27.15mm)
Internal diameter：From 0.125 inches (3.18mm) to 0.505 inches (12.83mm)
Load：From 4.5 pounds (20N) to 371 pounds（1650N）

HenrySpring washer-Specification >>Stainless steel

Material：Stainless steel17 - 7 -PH
Outer diameter：From 0.250 in. (6.35 mm) to 1.07 inches (27.15 mm)
Internal diameter：From 0.125 in. (3.18 mm) to 0.505 inches (12.83 mm)
Load：From 4.5 pounds (20N) to 371 pounds (1650N)

Special Order Spring washer(Waveform | dish saddle | Stainless steel | Elastic | Spring washer | washers)

If you need a special, the Spring washer can not be found in the above page, please contact us and we will provide you customized. Similarly, if you need special processing or handling of your Henry components please contact us。

For design and application assistance, please contact of Zhenjiang Henry spring project team。